Highly efficient and space-saving, they are manufactured in different systems according to production flow. Designed with low initial investment cost and low operating costs.
Heating exchangers are designed on the basis of maximum efficiency and minimum fuel consumption. Our thermoblocks mounted on the rear can raise the temperature from ambient to +230 ºC'ye +230°C. Boiler exchangers are manufactured from 310 grade stainless steel and are resistant up to 1000°C.
The smoke pipes used in thermoblocks are normalized seamless smoke pipes. The thermoblock is placed inside the combustion chamber and surrounded by 150mm rock wool. There is an access door on the combustion chamber for thermoblock malfunctions. The combustion chamber has a turbine fan that distributes heat to the oven. Combustion efficiency is monitored through the thermoblock inspection hole.
BoxType Curing and Drying ovens are manufactured from sandwich panels, mounted on chassis in demountable form. The inner section of the curing oven is 1.2mm ST 37 Galvanized, the outer section is manufactured from 1.2mm ST 37 material. The oven outer layer is coated with electrostatic powder coating to increase corrosion resistance.
An industrial dust collector draws dust-laden air away from the work area, separates the particles and releases clean air. In painting plants it serves two purposes. It protects operators and the workshop from airborne dust. In powder coating, it also recovers overspray powder so it can be reused, which lowers coating cost. The right dust collection system depends on the dust type, the air volume and how much material you want to recover. Acrotech designs and manufactures dust collection booths and systems in two main types: cartridge filter dust collectors and cyclone separators.
In a cartridge filter dust collector, the fan pulls the air through pleated filter cartridges. Dust stays on the cartridge surface and clean air passes through. Filtration reaches up to 99.9%. The cartridges clean themselves with pulse-jet reverse air: short bursts of compressed air knock the dust off the filter surface into the hopper. In powder coating applications, the collected powder can be sieved and reused. Cartridge collectors are compact and give very high filtration, which makes them a strong fit for powder coating booths and general fine-dust extraction.
A cyclone separator uses centrifugal force. Air enters the cyclone body and spins, throwing the heavier particles outward. They fall into the collection bin, where automatic sieving prepares the powder for reuse. Very fine particles that pass the cyclone are caught in an after-filter. The cyclone gives up to 96% recovery and keeps the filters free of colour build-up, so it suits lines with frequent colour changes and high powder throughput. Cyclone system details
| Criterion | Cartridge Filter | Cyclone Separator |
|---|---|---|
| Working principle | Dust held on filter cartridges | Centrifugal separation |
| Performance | Up to 99.9% filtration | Up to 96% recovery |
| Cleaning | Pulse-jet reverse air | Automatic sieving, after-filter for fines |
| Powder reuse | Sieved and reused | Sieved automatically and reused |
| Colour change | Cartridges hold colour | No colour build-up on filters |
| Best for | Few colours, fine-dust extraction | Frequent colour change, high throughput |
Dust collection is closely linked to booth design. See our powder coating booths for filter, cyclone and PVC booth options, or our powder coating plants for complete lines engineered from one capacity calculation.
In a powder coating line, the dust collector is part of the booth's recovery system. Its job is to keep the booth clean and send as much powder as possible back to the gun. In wood finishing, the dust collection system serves the sanding room and keeps fine wood dust away from the paint booth. In both cases, Acrotech sizes the fan, filters and ducting from the air volume each station needs, as part of one engineered plant.
The main factors are air flow, system type (cartridge filter or cyclone), number of cartridges, fan capacity, sieving and recovery equipment, and explosion protection needs. We prepare a quote after reviewing your application.
Yes. In both cartridge filter and cyclone systems, the collected powder can be sieved and reused. Cyclone separators reach up to 96% recovery with automatic sieving.
It depends on the dust type, operating hours and the differential pressure across the filters. When the pressure difference stays high after cleaning, it is time to replace the cartridges.
Get a quote for your dust collection system. Tell us your dust type, air volume and recovery needs, and our engineers will select the right dust collector for your plant.
Request a Quote +90 216 465 66 88