Box type, tunnel type, U-turn and thermal ovens. High-efficiency oven systems designed for curing electrostatic powder coating at 160–220°C.
View DetailsElectrostatic Powder Coating Plants
Electrostatic powder coating plants are high-efficiency, eco-friendly industrial coating systems used for painting metal surfaces. Acrotech designs and manufactures complete powder coating facilities including automatic and manual coating lines, curing and drying ovens, spray booths and conveyor systems. We provide turnkey solutions for automotive, white goods, furniture, machine manufacturing and metal processing industries.
Powder Coating Plant Components
What Is a Powder Coating Plant?
A powder coating plant, or powder coating line, is the complete set of equipment that takes a bare metal part, cleans it, coats it with electrostatic powder and cures it into a finished surface. Each station has its own job, but the result depends on how well they work together. A booth that can coat more parts than the oven can cure only creates a queue. This is why Acrotech engineers every powder coating line from one capacity calculation, so pre-treatment, booth, oven and conveyor all run at the same pace. We supply single machines or complete turnkey plants, and we carry out projects in Turkey, Europe, the Middle East and Central Asia.
Main Components of a Powder Coating Line
- Loading: Parts are hung on hangers, trolleys or the conveyor.
- Surface treatment (pre-treatment): Oil, dirt and rust are removed and the surface is prepared with iron phosphate, zinc phosphate or nano chemicals. See our surface treatment lines.
- Drying oven: Water from pre-treatment is removed before coating.
- Powder coating booth: Powder is applied and overspray is recovered. See our powder coating booths.
- Curing oven: The powder cures at 160–220°C. See our powder coating ovens.
- Cooling and unloading: Parts cool down and are taken off for packing or assembly.
- Conveyor: Links all stations and sets the line speed. See our conveyor systems.
Powder Coating Plant Types
| Plant Type | Typical Equipment | Best For |
|---|---|---|
| Manual | Filter booth, box oven, trolleys, manual gun | Small workshops, low capacity, varied parts |
| Semi-automatic | Overhead conveyor, pre-treatment, booth, tunnel or U-turn oven, manual guns | Medium capacity, steady production |
| Fully automatic | Conveyor, automatic pre-treatment, cyclone booth, automatic guns and paint robots, continuous oven, automation panel | High capacity, continuous series production |
Powder Coating Plant Installation Step by Step
- Needs analysis: Part sizes, weights, daily capacity, colours and available space are defined with you.
- Capacity calculation: Line speed, pre-treatment times and curing time are calculated as one system.
- Layout and engineering: The plant layout, conveyor route and utility needs are drawn and approved.
- Manufacturing: Booths, ovens, conveyors and pre-treatment tanks are built in our factory.
- Shipping and installation: Equipment is shipped and assembled on site, in Turkey or abroad.
- Commissioning and training: The line is started up, tested with your parts and your operators are trained.
What to Consider When Designing a Powder Coating Line
- Bottleneck: The line runs at the speed of its slowest station. Booth, oven and pre-treatment must be sized together.
- Surface preparation: Coating quality and corrosion resistance start with correct pre-treatment for your material.
- Colour change: The number of colours per day decides the booth type and the recovery system.
- Energy: Oven and pre-treatment heating are the largest energy users; the energy source is chosen at the project stage.
- Expansion margin: Leave space and capacity reserve for future growth.
- Safety and regulations: Earthing, explosion protection, ventilation and local rules are part of the design.
Defence Industry and Special Plants
Acrotech also builds special painting plants for aircraft, UAV/UCAV and tanks. These projects need tight process control and traceability at every step, from surface preparation to curing. For MDF and flat panels, see our MDF coating systems.
Frequently Asked Questions
What affects the cost of a powder coating plant?
The main factors are capacity, part size and weight, level of automation, number of pre-treatment stages, booth type, oven type and energy source, and conveyor length. We prepare a quote after defining these with you.
How long does installation take?
It depends on plant size and automation level. We give you a clear schedule after the project is approved.
How much space does a powder coating plant need?
A manual plant can fit in a small workshop. Conveyor lines need more length. A U-turn oven saves floor space because entry and exit are on the same side.
Plan your powder coating plant with Acrotech. Share your part sizes, daily capacity and available space, and our engineers will design the right powder coating line for you, from manufacturing to commissioning.
Request a Quote +90 216 465 66 88
TR
EN
FR
RU
AR
DE
ES
IT
CONTACT