Powder Coating Booths
What Is a Powder Coating Booth and How Does It Work?
A powder coating booth is the enclosed work area where electrostatic powder is sprayed onto the part and the excess powder in the air is extracted and recovered. Charged powder sticks to the earthed metal part. Powder that misses the part, called overspray, is drawn away by the booth fan, separated from the air and made ready for reuse. Booth types differ in how they separate it: with filter cartridges, with a cyclone, or with both.
The booth decides three things: recovery rate (your powder cost), colour-change time (your flexibility) and line capacity. That makes the powder coating booth one of the key decisions in a powder coating line. Acrotech builds three types: filter, cyclone and PVC antistatic.
Powder Coating Booth Types
1. Filter Powder Coating Booth
Overspray is held on cartridge filters. Our German HV filters retain particles down to 10 microns and give up to 95% powder recovery. Automatic pulse-jet valves drop the powder to the booth bottom, where it is sieved and returned to the gun. An average colour change takes 15–20 minutes. It is the most economical choice for few colours, medium capacity and manual application. Filter booth details
2. Cyclone Powder Coating Booth
A cyclone booth combines a booth unit and a cyclone unit. Centrifugal force separates the powder, which collects in the cyclone bin; very fine particles are caught in the after-filter. With no colour build-up on filters, it suits frequent colour changes and continuous, high-capacity automatic conveyor lines. Cyclone booth details
3. PVC Antistatic Powder Coating Booth
The non-adhesive PVC antistatic body keeps powder off the walls, allowing a colour change in 10–15 minutes, even with metallic and structured powders. Ideal for many colours and job-shop production. PVC antistatic booth details
Filter, Cyclone or PVC: Which Booth Suits You?
| Criterion | Filter Booth | Cyclone Booth | PVC Antistatic Booth |
|---|---|---|---|
| Powder separation | Filter cartridges | Centrifugal force (cyclone) + after-filter | Used together with filter or cyclone recovery |
| Colour-change time | 15–20 minutes on average | Fast, no colour build-up on filters | 10–15 minutes, even with metallic powders |
| Best for colours | Few colours, long runs | Many colours, continuous production | Many colours, frequent changes |
| Best for capacity | Small and medium | Medium and high | Medium and high |
| Application | Manual or automatic | Usually automatic guns on a conveyor line | Manual or automatic |
| Investment | Lowest | Medium | Highest |
How to Choose a Powder Coating Booth
- Part size and shape: Booth opening and dimensions follow your largest part and hanger layout.
- Colours per day: This decides between filter, cyclone or PVC.
- Manual or automatic: Automatic guns or a powder coating robot need a booth designed around them.
- Air flow and fan: Fan and filter sizes are calculated from the air speed at the booth opening.
- Recovery rate: Powder is a large share of operating cost.
- Ambient conditions: For high-quality work, place the booth in a positive-pressure room.
- Safety: Earthing, explosion protection and proper lighting are part of the booth design.
The Booth Is Part of a Powder Coating Plant
Parts first pass through the surface treatment line, are dried, coated in the booth and cured in the powder coating oven. A conveyor system links these steps. Acrotech can supply the booth as a single machine or as part of a complete turnkey powder coating plant.
Industries: metal furniture, white goods, automotive supply, steel doors and windows, lighting, electrical panels, machinery and defence parts.
From Project to Commissioning
- Needs analysis: Part sizes, capacity, colours and floor space.
- Engineering: Booth size, air flow, recovery capacity and layout.
- Manufacturing: Built in our own factory.
- Installation and commissioning: On-site assembly, electrical connections and test coating.
- Training and service: Operator training, technical support and spare parts.
Frequently Asked Questions
What affects the price of a powder coating booth?
The main factors are booth size, booth type (filter, cyclone or PVC), fan and filter capacity, manual or automatic application, and whether the booth is part of a complete plant. Send us your part sizes and capacity and we will prepare a quote for your project.
Should I choose a filter or a cyclone booth?
If you run long series with few colours, a filter booth is more economical. If you change colour many times a day and run at high capacity, a cyclone booth is more efficient.
How long does a colour change take?
About 15–20 minutes on average in filter booths and 10–15 minutes in PVC antistatic booths. In cyclone booths colour does not build up on the filters, so colour change is fast.
Do you ship powder coating booths abroad?
Yes. Acrotech exports to Europe, the Middle East and Central Asia. For projects abroad we provide manufacturing, shipping, on-site installation and commissioning together.
Get a quote for your powder coating booth. Send us your part sizes, daily capacity and number of colours, and our engineers will recommend the right booth type and prepare your price.
Request a Quote +90 216 465 66 88
TR
EN
FR
RU
AR
DE
ES
IT
CONTACT


