Products & Facilities
Industrial Painting Plants and Equipment: Our Products
Acrotech designs and manufactures industrial painting plants and the equipment inside them: powder coating plants, powder coating booths and ovens, wet paint booths and plants, overhead conveyors, pretreatment lines, dust collectors, wood finishing systems and paint robots. You can buy a single machine or a complete turnkey line. Every plant is engineered from one capacity calculation, so all stations work at the same pace. We carry out projects in Turkey, Europe, the Middle East and Central Asia, including manufacturing, shipping, on-site installation and commissioning. Whether you need an industrial painting plant for a new factory or a single booth for a small workshop, use the table below to find the right product group.
All Product Groups at a Glance
| Product Group | What It Does | Models |
|---|---|---|
| Powder Coating Plants | Complete lines that clean, coat and cure metal parts | Manual, semi-automatic, fully automatic |
| Powder Coating Booths | Apply powder and recover overspray, up to 95% recovery in filter booths | Filter, cyclone, PVC antistatic |
| Powder Coating Ovens | Cure the powder, typically at 160–220°C | Box, tunnel, U-turn, UFK pallet-conveyor, thermal (aluminium ageing) |
| Wet Painting Facilities | Complete lines for liquid paint on large, heavy or heat-sensitive parts | Manual, conveyorised, automatic/robotic |
| Wet Paint Booths | Spray liquid paint and filter the paint mist | Water-curtain (99% total filtration), dry-filter (up to 98%) |
| Wet Paint Ovens and Positive-Pressure Rooms | Dry liquid paint; condition air temperature and humidity and keep dust out | Drying ovens, positive-pressure room |
| Surface Treatment Lines | Degrease, phosphate and passivate parts before coating | Spray, dip |
| Conveyors | Carry parts through all stations, including ovens (bearings up to 250°C) | Power and free, cardan, webb, fivet |
| Dust Collection | Extract and separate dust, recover powder | Cartridge filter (up to 99.9%), cyclone (up to 96% recovery) |
| Wood Painting Facilities | Sanding, painting and drying for furniture, panels and MDF | Sanding rooms, wood paint booths, drying ovens, wood-pattern transfer |
| Paint Robots | Automatic gun movement for repeatable coating | Up to 8 guns, 3000 mm stroke |
Why One Turnkey Manufacturer?
A painting line is only as fast as its slowest station. When the booth, oven, conveyor and pretreatment come from different suppliers, nobody owns the whole line, and capacity gaps appear between stations. Acrotech designs every part of the plant in-house and sizes them with one capacity calculation. Line speed, pretreatment times, booth air flow and oven curing time are planned together. You get one project, one layout and one partner for manufacturing, installation, commissioning and technical support.
Our ovens use thermoblock heating, 310S stainless steel heat exchangers resistant to 1000°C and 150 mm rock wool insulation. Our booths range from economical filter booths to cyclone and PVC antistatic booths for fast colour change. Our overhead conveyors carry loads up to 2 tonnes with power and free systems.
Powder Coating or Wet Paint?
Powder coating suits metal parts that can be cured at 160–220°C. The overspray is recovered and reused, which keeps coating cost low. Wet paint suits parts that are too large, too heavy or too heat-sensitive for a curing oven, and jobs that need special colours, effects or film builds. Wood, furniture and MDF need their own approach, with sanding, low-temperature drying and strict dust control. If you are not sure which process fits your parts, our engineers will compare the options with you at the project stage.
How We Work
- Needs analysis: Part sizes, capacity, colours and available space.
- Engineering: One capacity calculation and a plant layout for the whole line.
- Manufacturing: All equipment is built in our own factory.
- Installation and commissioning: On site, in Turkey or abroad.
- Training and service: Operator training, technical support and spare parts.
Industries We Serve
Acrotech painting plants work in metal and heavy industry, white goods, automotive supply, metal furniture, furniture and wood, lighting, shipbuilding, steel, and defence and aerospace. For the defence industry we build paint plants for aircraft, tanks and UAV/UCAV, and coating lines for ammunition, rocket and missile parts. For spray guns, Wagner equipment and spare parts, visit acrotechmakina.com.
Not sure which product you need? Send us your part sizes, materials and daily capacity. Our engineers will recommend the right painting plant or machine and prepare your quote.
Request a Quote +90 216 465 66 88
TR
EN
FR
RU
AR
DE
ES
IT
CONTACT








