Uniform heat distribution, energy efficiency and fast drying with professional oven systems.
View DetailsIndustrial Wet Painting Facilities
ACROTECH Wet Painting Facilities provide complete solutions for high-quality surface finishing in furniture, automotive, metal processing, and white goods industries. We offer manual and automatic systems, waterfall and filter booths, drying ovens for professional painting processes.
With positive pressure control, advanced filtration systems and uniform air distribution, our facilities guarantee excellent surface quality — especially for high-gloss lacquer applications.
Advantages of Wet Painting Facilities
Excellent Surface Quality
Positive pressure control and advanced filtration prevents foreign particles from adhering to the painting surface. Perfect results for high-gloss lacquer applications.
Eco-Friendly System
Waterfall and filter systems capture liquid paint particles, preventing atmospheric emissions. Fully compliant with environmental regulations.
Flexible & Efficient Production
Manual and automatic system options for different production capacities. Fast color change, easy maintenance and low operating costs.
Operator Health
Working under positive pressure inside a closed booth prevents operator exposure to paint fumes. Fully compliant with occupational safety standards.
What Is a Wet Paint Plant?
A wet paint plant is a complete painting line that applies liquid paint, then flashes off and dries it under controlled conditions. It is the right choice when parts are too large, too heavy or too heat-sensitive for a powder curing oven, or when you need special colours, effects or film builds. A wet painting line brings together surface preparation, paint booths, a clean air environment, drying and part handling. Acrotech designs these components as one system, so each station works at the same pace and the finish stays consistent.
Main Components of a Wet Painting Line
- Surface preparation: Parts are cleaned and prepared before painting. See our surface treatment lines and sanding rooms.
- Paint booths: Water-curtain or dry-filter booths capture the paint mist. See our wet paint booths.
- Positive-pressure room: Conditions air temperature and humidity and keeps outside dust away. See the positive-pressure room.
- Flash-off zone: Solvents evaporate before the part enters the oven, which prevents bubbles and runs.
- Drying oven: Dries the paint at controlled temperature. See our wet paint drying ovens.
- Handling: Trolleys, rails or conveyor systems move parts between stations.
Wet Paint Plant or Powder Coating Plant?
| Criterion | Wet Paint Plant | Powder Coating Plant |
|---|---|---|
| Paint | Liquid paint, solvent-based or water-based | Dry electrostatic powder |
| Suitable parts | Large, heavy or heat-sensitive parts; special colours and film builds | Metal parts that can be cured at 160–220°C |
| Overspray | Captured by water curtain or dry filters, not reused | Recovered and reused |
| Drying | Flash-off, then drying oven | Curing oven at 160–220°C |
| Flexibility | Primer, topcoat, special effects, colours mixed as needed | Colour-change time depends on booth type |
Wet Painting Line Types
- Manual: Parts are moved on trolleys or rails and painted by hand. Flexible for large and varied parts.
- Conveyorised: An overhead or floor conveyor carries parts through the booth, flash-off zone and oven for steady series production.
- Automatic / robotic: Paint robots and automatic guns give repeatable film thickness on high-volume lines.
Defence Industry and Large Parts
Military vehicles, tanks, aircraft and UAV bodies are often painted in wet paint plants. These parts are large, and the coating specifications are strict. Temperature and humidity control in the booth and drying zone, together with careful film-thickness control, are essential. Acrotech designs special wet painting lines for these projects, with booth size, air flow and drying matched to the part.
Why Work With Acrotech
Acrotech designs and manufactures booths, ovens, conveyors and surface treatment lines in its own factory. We can supply a single paint booth or a complete turnkey wet paint plant engineered with one capacity calculation. For projects in Europe, the Middle East and Central Asia, we handle manufacturing, shipping, on-site installation and commissioning.
From Project to Commissioning
- Needs analysis: Part sizes, weights, paint system, daily output and available space.
- Engineering: Booth size, air flow, flash-off and drying times are calculated as one system, and the layout is drawn.
- Manufacturing: Booths, ovens and handling equipment are built in our own factory.
- Installation and commissioning: On-site assembly, start-up and test painting.
- Training and service: Operator training and technical support.
Frequently Asked Questions
What affects the cost of a wet paint plant?
The main factors are part size and weight, capacity, booth type, whether you need a positive-pressure room, drying oven size and energy source, the handling system and the level of automation. We prepare a quote after defining these with you.
What does water-based paint need?
Water-based paint needs more heat and better control of air temperature and humidity to dry properly. A positive-pressure room and a well-sized drying oven help keep results stable.
Can primer and topcoat be applied in the same booth?
At small capacity, yes. For series production, separate booths for primer and topcoat are recommended.
Plan your wet paint plant with Acrotech. Send us your part sizes, paint system and daily output, and our engineers will design the right wet painting line for you.
Request a Quote +90 216 465 66 88
TR
EN
FR
RU
AR
DE
ES
IT
CONTACT


